Sewer Hose Storage

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #45187

    Ordered the fence post from Home Depot (free shipping to my house), about a week ago. I got a new welder that runs on 110 V, so I wanted to try it out. I used one of the cross pieces that is under the under belly, and welded the up the supports. I used vinyl gutter for pull out tries, and can be used for hose supports too.

    • This topic was modified 5 years, 4 months ago by John R Walker.
    #45589
    Slim Lundeen
    Member

    Sure wish I could see the pictures.

    🙁

    #45608
    Slim Lundeen
    Member

    So are the holding tubes themselve 1/4″ X 6″ Square tubing.  That is amazing.  I am sort of hoping my bumper is hollow so I can store my hoses it that.  Tilly ships from the factory about the 16th.  :yahoo:

    #45619

    The tube are 5″ square.  I don’t have a bumper on my Montana.

    #45621
    Slim Lundeen
    Member

    Is it square tubing or did you weld that up too?

    #45623

    They are vynal fencepost.  I got them from Home Depot.

    #45714
    Slim Lundeen
    Member

    Very Cool!  Trust me, I am writing this down.  I am lucky though.  I can just drag Tilly down to my boys shop and he can do the welding.  I just bring the pizza and pop.  Thanks for the instruction.  I am Grateful.   Slim

     

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.